| Peer-Reviewed

Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure

Received: 12 February 2022    Accepted: 2 March 2022    Published: 9 March 2022
Views:       Downloads:
Abstract

The objective of this work is to understand and successfully control the phenomena found at the openings when the enclosure is subjected to a linear heat source. The enclosure is not adiabatic. The control and understanding of its phenomena will be carried out by differential static pressure measurements. These measurements were carried out in calm weather using a Furness control micro–manometer in 20 points at positions x+ = 0, y+ = - 0.5 and along the vertical z+. We have studied four enclosure configurations. Each configuration has two or four or six openings. The openings have identical characteristics, height h = 34 mm and width l = 210 mm. The height of the enclosure is H = 520 mm and the length is equal to the width L = l = 210 mm. We have shown the influences of the reduced Grashof number (Gr*), the number and the position of the openings on the differential static pressure with and without dimension and compared the experimental results obtained with those of cases 11 and 12 of Koueni Toko (2019). It appears that the values and forms of the static pressure and the values of the neutral height can vary according to Gr* and number and the position of the openings.

Published in Engineering and Applied Sciences (Volume 7, Issue 1)
DOI 10.11648/j.eas.20220701.12
Page(s) 8-15
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Enclosure, Semi–ventilated, Linear Heat Source, Pressure Profile

References
[1] Linden P. F., Lane–Serff G. F., Smeed D. A. (1990) Emptying filling boxes: the fluid mechanics of natural ventilation, Journal of Fluid Mechanics, 212, 309–335.
[2] Kaye N. B. and Hunt G. R. (2004) Time–dependent flows in an emptying filling box, Journal of Fluid Mechanics, 520, 135–156.
[3] Koueni Toko C. A. (2019) Etude des champs dynamique et thermique dans une enceinte semi–ventilée en convection naturelle, Rapport annuel de thèse–CORIA.
[4] Kouéni–Toko C. A., Tcheukam–Toko D., Kuitche A., Patte–Rouland B., Paranthoën P. (2020) Numerical modeling of the temperature fields in a semi–confined enclosure heated by a linear heat source, International Journal of Thermofluids, Vol. 7–8, 100017.
[5] Mahmud H. Ali, Rawand E. Jalal (2020) Natural convection in a square enclosure with different openings and involves two cylinders: a numerical approach, Frontiers in Heat and Mass Transfer, 15, 27.
[6] Gladstone C. and Woods A. W. (2001) On buoyancy–driven natural ventilation of a room with a heated floor, Journal of Fluid Mechanics, 441, 293–314.
[7] Kaye N. B., Hunt G. R. (2007) Overturning in a filling box, Journal of Fluid Mechanics, 576, 297–323.
[8] Jun Fang, Hong–Yong Yuan (2007) Experimental measurements, integral modeling and smoke detection of early fire in thermally stratified environments, Fire Safety Journal, 42, 11–24.
[9] Fitzgerald S. D. and Woods A. W. (2010) Transient natural ventilation of a space with localized heating, Building and Environment, 45, 2778–2789.
[10] Jeremy C. P. and Andrew W. W. (2004) On ventilation of a heated room through a single doorway, Building and Environment, 39, 241–253.
[11] Paranthoёn P. and Gonzalez M. (2010) Mixed convection in a ventilated enclosure, International Journal of Heat and Fluid Flow, 31, 172–178.
[12] Lucchesi C. (2009) Etude du mouvement d'un fluide de faible masse volumique entre deux compartiments reliés par une ouverture de type porte: Application à la propagation de la fumée d'incendie, Thèse Mécanique des fluides Aix Marseille II–France.
[13] Decheng Li (2018) Transport phenomena of fire-induced smoke flow in a semi-open vertical shaft, International Journal of Numerical Methods for Heat & Fluid Flow, 28, 2664–2680.
[14] R. Harish (2019) Buoyancy driven turbulent plume induced by heat source in vented enclosure, International Journal of Mechanical Sciences, 148, 209–222.
[15] José Luis Fernàndez–Zayas, Juan Francisco Villa–Medina, Norberto Chargoy–del Valle, Miguel Àngel Porta–Gàndara (2022) Experimental analysis of natural ventilation of an office building in Mexico city, Case Studies in Thermal Engineering, Vol. 28, 101661.
[16] Fitzgerald Shaun D., Woods A. W. (2004) Natural ventilation of a room with vents at multiple levels, Building and Environment, 39, 505–521.
Cite This Article
  • APA Style

    Kouéni-Toko Christian Anicet, Patte-Rouland Béatrice, Paranthoën Pierre. (2022). Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure. Engineering and Applied Sciences, 7(1), 8-15. https://doi.org/10.11648/j.eas.20220701.12

    Copy | Download

    ACS Style

    Kouéni-Toko Christian Anicet; Patte-Rouland Béatrice; Paranthoën Pierre. Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure. Eng. Appl. Sci. 2022, 7(1), 8-15. doi: 10.11648/j.eas.20220701.12

    Copy | Download

    AMA Style

    Kouéni-Toko Christian Anicet, Patte-Rouland Béatrice, Paranthoën Pierre. Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure. Eng Appl Sci. 2022;7(1):8-15. doi: 10.11648/j.eas.20220701.12

    Copy | Download

  • @article{10.11648/j.eas.20220701.12,
      author = {Kouéni-Toko Christian Anicet and Patte-Rouland Béatrice and Paranthoën Pierre},
      title = {Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure},
      journal = {Engineering and Applied Sciences},
      volume = {7},
      number = {1},
      pages = {8-15},
      doi = {10.11648/j.eas.20220701.12},
      url = {https://doi.org/10.11648/j.eas.20220701.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.eas.20220701.12},
      abstract = {The objective of this work is to understand and successfully control the phenomena found at the openings when the enclosure is subjected to a linear heat source. The enclosure is not adiabatic. The control and understanding of its phenomena will be carried out by differential static pressure measurements. These measurements were carried out in calm weather using a Furness control micro–manometer in 20 points at positions x+ = 0, y+ = - 0.5 and along the vertical z+. We have studied four enclosure configurations. Each configuration has two or four or six openings. The openings have identical characteristics, height h = 34 mm and width l = 210 mm. The height of the enclosure is H = 520 mm and the length is equal to the width L = l = 210 mm. We have shown the influences of the reduced Grashof number (Gr*), the number and the position of the openings on the differential static pressure with and without dimension and compared the experimental results obtained with those of cases 11 and 12 of Koueni Toko (2019). It appears that the values and forms of the static pressure and the values of the neutral height can vary according to Gr* and number and the position of the openings.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Experimental Study of the Pressure Generated by a Linear Heat Source in a Semi–ventilated Enclosure
    AU  - Kouéni-Toko Christian Anicet
    AU  - Patte-Rouland Béatrice
    AU  - Paranthoën Pierre
    Y1  - 2022/03/09
    PY  - 2022
    N1  - https://doi.org/10.11648/j.eas.20220701.12
    DO  - 10.11648/j.eas.20220701.12
    T2  - Engineering and Applied Sciences
    JF  - Engineering and Applied Sciences
    JO  - Engineering and Applied Sciences
    SP  - 8
    EP  - 15
    PB  - Science Publishing Group
    SN  - 2575-1468
    UR  - https://doi.org/10.11648/j.eas.20220701.12
    AB  - The objective of this work is to understand and successfully control the phenomena found at the openings when the enclosure is subjected to a linear heat source. The enclosure is not adiabatic. The control and understanding of its phenomena will be carried out by differential static pressure measurements. These measurements were carried out in calm weather using a Furness control micro–manometer in 20 points at positions x+ = 0, y+ = - 0.5 and along the vertical z+. We have studied four enclosure configurations. Each configuration has two or four or six openings. The openings have identical characteristics, height h = 34 mm and width l = 210 mm. The height of the enclosure is H = 520 mm and the length is equal to the width L = l = 210 mm. We have shown the influences of the reduced Grashof number (Gr*), the number and the position of the openings on the differential static pressure with and without dimension and compared the experimental results obtained with those of cases 11 and 12 of Koueni Toko (2019). It appears that the values and forms of the static pressure and the values of the neutral height can vary according to Gr* and number and the position of the openings.
    VL  - 7
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Renewable Energy, National Advanced School of Engineering of Maroua, University of Maroua, Maroua, Cameroon

  • CNRS UMR 6614 CORIA, University Boulevard, Saint–Etienne du Rouvray, France

  • Sections